|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch February 2008 FSA5157 0.4 Low-Voltage SPDT Analog Switch Features Typical 0.4 On Resistance (RON) for +2.7V Supply FSA5157 Features Less than 12A ICCT Current General Description The FSA5157 is a low on resistance, low-power, Single Pole Double Throw (SPDT) analog switch. This product has been designed for switching audio signals in applications such as cell phones and portable media players. The ultra-low 0.4 impedance, sub-A current consumption, and 1.65V to 4.3V operating voltage range makes this product ideal for battery-powered applications. The FSA5157 also features bi-directional operation and break-before-make functionality. This device is fully specified for operation at 1.8V, 2.5V, and 3.3V. A growing number of applications require the voltage applied to the select input to be lower than the VCC applied. Under this condition, most switches would typically consume over 100A of current. This would be an unacceptable level for battery-powered applications. The FSA5157 is designed to minimize current consumption under this condition. The ICCT is specified for <12A under a worst-case condition of VCC = 4.3V and VIN = 1.8V. When S Input is Lower than VCC 0.25 Maximum RON Flatness for +2.7V Supply 1.0 x 1.45mm 6-Lead MicroPakTM Package Broad VCC Operating Range: 1.65V to 4.3V Low THD (0.02% Typical for 32 Load) High-Current Handling Capability (350mA Continuous Current Under 3.3V Supply) Control Logic is 1.8V CMOS Logic Compatible Applications Cellular Phone PDA Portable Media Player Ordering Information Order Number FSA5157P6X FSA5157L6X Top Mark C57 FT Package Description 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Packing Method 3000 Units on Tape and Reel 5000 Units on Tape and Reel All packages are lead free per JEDEC: J-STD-020B standard. Application Diagram Headphone VCC Audio Amplifier S Internal Speaker Figure 1. Application Diagram MicroPakTM is a trademark of Fairchild Semiconductor Corporation. (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch Pin Assignments Truth Tables Control Input(s) LOW Logic Level Function B0 Connected to A B1 Connected to A B1 1 6 S HIGH Logic Level GND 2 5 VCC Pin Descriptions Pin Names A, B0, B1 S Function Data Ports Control Input B0 3 4 A Figure 2. 6-Lead SC70 S1 6 B1 VCC 2 5 GND A3 4 B0 Figure 3. 6-Lead MicroPakTM (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 2 FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VS VIN IIK ISW ISWPEAK PD TSTG TJ TL ESD Supply Voltage Switch Voltage (1) Parameter Min. -0.5 -0.5 -0.5 Max 5.5 VCC + 0.3V VCC -50 350 500 180 180 Units V V V mA mA mA mW mW C C C V Input Voltage(1) Input Diode Current Switch Current Peak Switch Current (Pulsed at 1ms duration, <10% Duty Cycle) SC70 6L Package MicroPak 6L Package Storage Temperature Range Maximum Junction Temperature Lead Temperature Soldering, 10 seconds Human Body Model -65 +150 +150 +260 8000 Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC VIN VIN TA Note: Supply Voltage Control Input Voltage(2) Switch Input Voltage Operating Temperature Parameter Min. 1.65 0 0 -40 Max. 4.30 VCC VCC +85 Rating V V V C 2. Unused inputs must be held HIGH or LOW. They may not float. (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 3 FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch DC Electrical Characteristics All typical values are at 25C unless otherwise specified. TA=+25C Min. 3.6 to 4.3 2.7 to 3.6 VIH Input Voltage High 2.3 to 2.7 1.65 to 1.95 3.6 to 4.3 2.7 to 3.6 VIL Input Voltage Low 2.3 to 2.7 1.65 to 1.95 IIN INO(OFF), INC(OFF) Control Input Leakage Off-Leakage Current of Port B0 and B1 On Leakage Current of Port A VIN = 0V to VCC A = 0.3V, VCC -0.3V, B0 or B1 = 0.3V, VCC - 0.3V or Floating A = 0.3V, VCC -0.3V, B0 or B1 = 0.3V, VCC - 0.3V or Floating IOUT = 100mA, B0 or B1 = 0V, 0.7V, 3.6V, 4.3V IOUT = 100mA, B0 or B1 = 0V, 0.7V, 2.0V, 2.7V Switch On Resistance(3) IOUT = 100mA, B0 or B1 = 0V, 0.7V, 2.0V, 2.3V IOUT = 100mA, B0 or B1 = 0.7V 1.65 to 4.3 1.95 to 4.3 -10 10 -0.5 -50 Symbol Parameter Conditions VCC (V) TA= -40C to +85C Max. Min. 1.4 1.3 1.1 0.9 0.7 0.5 0.4 0.4 0.5 50 Units Typ. Max. V V A nA IA(ON) 1.95 to 4.3 -20 20 -100 100 nA 4.3 2.7 2.3 1.65 4.3 0.36 0.4 0.55 1.5 0.04 0.06 0.12 1.0 2.5 0.60 0.7 0.80 3.0 0.75 0.13 0.20 RON RON On Resistance Matching IOUT = 100mA, Between Channels(4) B0 or B1 = 0.7V 2.7 2.3 1.65 4.3 0.25 0.25 0.3 0.3 -100 30 7.0 3.0 100 12.0 6.0 -500 500 15.0 7.0 RFLAT(ON) On Resitance Flatness(5) IOUT = 100mA, B0 or B1 = 0V to VCC 2.7 2.3 1.65 ICC Quiescent Supply Current Increase in ICC per Control Input VIN = 0V or VCC, IOUT = 0 VIN = 1.8V VIN = 2.6V 4.3 4.3 4.3 nA A ICCT Notes: 3. On resistance is determined by the voltage drop between A and B pins at the indicated current through the switch. 4. RON = RONmax - RONmin measured at identical VCC, temperature, and voltage. 5. Flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions. (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 4 FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch AC Electrical Characteristics All typical values are at 25C unless otherwise specified. TA = +25xC Min. 3.6 to 4.3 tON Turn-On Time B0 or B1 = 1.5V, RL = 50, CL = 35pF 2.7 to 3.6 2.3 to 2.7 1.65 to 1.95 3.6 to 4.3 tOFF Turn-Off Time B0 or B1 = 1.5V, RL = 50, CL = 35pF 2.7 to 3.6 2.3 to 2.7 1.65 to 1.95 3.6 to 4.3 tBBM Break-BeforeMake Time B0 or B1 = 1.5V, RL = 50, CL = 35pF 2.7 to 3.6 2.3 to 2.7 1.65 to 1.95 3.6 to 4.3 Q Charge Injection CL = 1.0 nF, VGEN = 0V, RGEN = 0 2.7 to 3.6 2.3 to 2.7 1.65 to 1.95 3.6 to 4.3 OIRR Off-Isolation f = 100kHz, RL =50, CL = 5pF (Stray) 2.7 to 3.6 2.3 to 2.7 1.65 to 1.95 3.6 to 4.3 Xtalk Crosstalk f = 100kHz, RL =50, CL = 5pF (Stray) 2.7 to 3.6 2.3 to 2.7 1.65 to 1.95 BW -3db Bandwidth RL = 50 RL = 32, VIN = 2VPP, f = 20Hz to 20kHz RL = 32, VIN =1.5VPP, f = 20Hz to 20kHz RL = 32, VIN =1.2VPP, f = 20Hz to 20kHz 1.65 to 4.3 3.6 to 4.3 2.7 to 3.6 2.3 to 2.7 1.65 to 1.95 0.02 0.036 0.01 % Figure 14 -75 -75 -75 -75 -75 -75 -75 -70 80 MHz Figure 13 dB Figure 10 dB Figure 9 6 6 6 pC Figure 11 40 5 5 5 5 ns Figure 8 70 30 35 40 Typ. Max. 55 60 65 TA = -40xC to +85xC Min. Max. 60 65 70 90 35 40 45 55 ns Figure 7 ns Figure 7 Symbol Parameter Conditions VCC (V) Units Figure THD Total Harmonic Distortion Capacitance Symbol CIN COFF CON Parameter Control Pin Input Capacitance B Port OFF Capacitance A Port ON Capacitance Conditions f = 1MHz f = 1MHz f = 1MHz VCC (V) 0.0 4.5 4.5 TA =+25C Min. Typ. 1.5 21.0 90.0 TA =40C to +85C Units Max. Min. Max. pF pF pF Figure Figure 12 Figure 12 Figure 12 (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 5 FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch Typical Characteristics 600 540 480 420 600 85C 540 85C 480 420 RON (m) RON (m) 360 300 240 180 120 60 0 0.00 0.50 1.00 1.50 2.00 2.50 -40C 25C 360 300 -40C 25C 240 180 120 60 0 0.00 0.60 1.20 1.80 2.40 3.0 VB (V) Sweep Left to Right VB (V) Sweep Left to Right Figure 4. RON Switch On Resistance, ION = 100mA, VCC = 2.3V B0 Figure 5. RON Switch On Resistance, ION = 100mA, VCC = 2.7V B0 500 450 400 350 85C RON (m) 300 250 200 160 100 50 0 0.00 0.90 1.80 2.70 3.60 4.50 -40C 25C VB (V) Sweep Left to Right Figure 6. RON Switch On Resistance, ION = 100mA, VCC = 4.3V B0 (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 6 FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch AC Loading and Waveforms tRISE = 2.5ns Bn VIN GND RS CL CL GND VSel GND RL VOUT VCC A Input - S GND 10% 90% VCC/2 90% VCC/2 10% tFALL = 2.5ns VOH Output - VOUT VOL tON 90% 90% tOFF Notes: 6. RL, RS, and CL are functions of the application environment (see AC Electrical table for specific values). 7. CL includes test fixture and stray capacitance. Figure 7. Turn-Off Timing VCC VCC A B1 1 VB B0 VOUT RL CL * Control Input VCC 0V VOUT 50% tR = tF = 2.5 ns (10-90%) S Control Input GND 0.9 x VOUT tBBM *CL includes fixture and stray capacitance Figure 8. Break-Before-Make Timing Network Analyzer RS RT VSel GND GND Off-Isolation = 20 Log (VOUT/VIN) RT GND GND VIN GND VOUT VS GND Figure 9. Off Isolation (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 7 FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch AC Loading and Waveforms (continued) Network Analyzer RS VIN GND VSel GND VS GND RT GND RT GND Crosstalk = 20 Log (VOUT/VIN) VOUT GND RS and RT are functions of the application environment (50, 75, or 100). Figure 10. Non-Adjacent Channel-to-Channel Crosstalk Generator nB B VIN nBn VS RS GND nSn VSel *CL includes fixture and stray capacitance. GND CL* GND VOUT VCC Input - VSel 0V VOUT VOUT Off On Off Q = VOUT x CL Figure 11. Charge Injection Test Capacitance Meter f=1MHz A S VSEL = 0 or VCC A S Capacitance Meter f=1MHz Bn VSEL = 0 or VCC Bn Channel On Capacitance Channel Off Capacitance Figure 12. On/Off Capacitance Measurement Setup (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 8 FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch AC Loading and Waveforms (continued) Network Analyzer RS VIN GND VSel GND GND RT GND VOUT VS GND Figure 13. Bandwidth 10nF VIN Signal Generator BN VCC Analyzer RL S Logic Input 0V or VCC GND Figure 14. Harmonic Distortion (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 9 FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch Physical Dimensions Figure 15. 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 10 FSA5157 -- 0.4 Low-Voltage SPDT Analog Switch Physical Dimensions 2X 0.05 C 1.45 B 2X 0.05 C (1) 1.00 (0.49) 5X (0.75) (0.52) 1X (0.30) 6X RECOMMENED LAND PATTERN 0.05 C 0.45 0.35 TOP VIEW 0.55MAX A PIN 1 0.05 C 0.05 0.00 C 0.25 0.15 6X 0.10 0.05 0.35 5X 0.25 0.40 5X 0.30 (0.05) 6X 0.5 BOTTOM VIEW (0.13) 4X CBA C 0.10 0.00 6X DETAIL A 1.0 0.40 0.30 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 16. 6-Lead MicroPakTM, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ For MicroPak tape and reel specifications, please visit Fairchild Semiconductor's online packaging area: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf (c)2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 11 Running H/F 1 -- Running H/F 2 (c) 2006 Fairchild Semiconductor Corporation FSA5157 Rev. 1.0.3 www.fairchildsemi.com 12 |
Price & Availability of FSA515708 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |